The short answer: a curved wedding band follows the outline of a halo engagement ring so the two sit flush with no gap, and it is usually the best choice for a halo. A straight band can leave a visible space and may tilt the engagement ring.
Halo rings have a ring of small stones around the centre diamond, which makes the setting wider and sometimes higher. A straight band tends to touch the halo at one point only. A curved band is shaped to hug it.
What a curved band looks like
A curved band has an arc cut into one edge that matches the curve of the halo. It can be plain or set with diamonds. When worn together, the rings look like a single piece.
Why it matters
- Appearance: no gap between the rings.
- Comfort: the rings sit together without pushing each other.
- Protection: the band shields the sides of the halo.
Alternatives
- Notched band: a cut out section for the setting.
- Straight band with a gap: a deliberate, modern look.
- Wear separately: the band on the other hand or at different times.
See contoured and notched wedding bands.
Getting the curve right
The curve has to match the particular halo, including its width and height. This is why a made to measure band is the best way to get a close fit. We design the curve from the engagement ring and show you a render so you can check it.
One curve or two
Some people wear one curved band below the engagement ring. Others wear two, one above and one below, so the halo sits in a frame of metal or diamonds. Two curved bands give a balanced, almost crown like look, and they protect the halo on both sides. If you might add a second band later, tell us at the start so both can be planned to match.
Plain or diamond set
A plain curved band keeps focus on the halo. A diamond set curved band adds sparkle and a coordinated look, though it makes resizing more complex.
Round, oval and cushion halos
The shape of the halo changes the curve. A round halo needs a shallow, even arc, while an oval or cushion halo needs a longer, flatter curve. A pear or marquise halo may suit a V shaped band better, so we look at your ring before recommending one.
Wear between the rings
Because a curved band sits tight against the halo, the two rings touch along the whole curve. Over time, that contact can wear the metal and the small claws of the halo. A yearly check helps catch any wear early, and keeping the two rings in the same metal helps them wear evenly. See how rings and bands wear together.
If you are planning ahead
If the band will be added later, tell us when the engagement ring is designed, so the halo can leave room for it. If you already own the ring, send us clear photos and the measurements, and we can plan the band from those.
How to choose
- Look at the shape of the halo.
- Choose between a curved, notched or straight band.
- Decide on plain or diamond set.
- Approve the fit in a render.
Nothing is made until you approve the design in writing, and our standard making time is 5 to 6 weeks, which can vary with your location and how busy we are. Pieces start from £600.
See chevron and V shaped wedding bands, wedding bands for rings with a large stone and halo engagement rings.
Frequently asked questions
Do all halo rings need a curved band? No, but many look better with one.
Can I buy a curved band separately? Yes, we can make one to fit your ring.
Will a curved band fit a different ring later? Probably not, since it is shaped to one ring.
Can a curved band be diamond set all the way round? Often yes, and we explain how that affects resizing.
Can I wear two curved bands? Yes, one above and one below the halo, and we design them to match.